PC/104 Module

 
 
 
  Card Input Output  
  Pieces Typ Data Pieces Typ Data Specials
                 
QI104-RELAY8/IN8Relais/Opto 8 Opto-IN 10-30V 8 Relays 48V DC 30V AC 1A  
8 changeover relays (SPDT / Form C)
8 opto-isolated digital inputs
Debounce Filter  More info...

                 
AIM104-ADC16/IN8A/D + Opto-IN 16 A/D 12Bit       8*Opto-IN
12-bit ADC inputs, link selectable as either 16 single-ended or 8 differential channels
Maximum acquisition rate: 500Hz
8 opto-isolated digital inputs
All digital inputs include a fixed 10mS input debounce filter
Module access LED  More info...

                 
AIM104-CAN  1 CAN ISO11898        
Single-channel opto-isolated CAN interface
Philips 82C200, or SJA 1000 CAN
Supports CAN ISO11898 network connection (CAN 1.1 and 2.0a)
Up to !Mbit per sec baud rate
On-board link-selectable CAN termination network
Three bi-colour diagnostic LEDs, driven by output port  More info...

                 
AIM104-COM4Seriell I/O              
Comms. channels: 4-off 16C550 UART
Signalling Standards: 2-off RS232 2-off 2-off isolated: RS422 Point-point; RS422 Multi-drop; RS485
Baud Rate: Up to 115.2 Kbaud
Address Select: Standard PC AT ports COM1, 2, 3 and 4 or selectable 0-3F0h  More info...

                 
AIM104-IN16Opto-IN 16 Opto 10-30V        
16 opto-isolated digital inputs
Maximum input frequency 50Hz with filters; 10KHz without filters
Reverse protection diodes on all inputsOption for 10mS input debounce filters on each channel
Module inputs driven by external power source  More info...

                 
AIM104-IN16-DC/DCOpto-IN 16 Opto-IN 10-30V       DC/DC-Converter
116 opto-isolated digital inputs
Input switching voltage: 10 to 30V
Maximum input frequency 50Hz with filters; 10KHz without filters
Reverse protection diodes on all inputs
Option for 10mS input debounce filters on each channel
Module inputs driven by an on-module +24V isolated DC/DC converter  More info...

                 
AIM104-IO32TTL-I/O 32 TTL-I/O          
32 digital I/O channels
Bit-programmable for input or output; outputs configurable on power-up or reset
Sink capability 24mA @ 0.45V or source current of 500µA @ 2.7V  More info...

                 
AIM104-KEYDISP  1            
8-bit PC/104 interface for connection to CPU platform, plus LCD and matrix keypad interface via a 50-way ribbon cable
Supports Alphanumeric LCD's up to 4 x 20 characters (HD44780 controller)
Supports Graphics LCD's up to 240 x 128 pixels (HD61830B or T6963C controller)
Plus up to two 4/12/16-key keypads, or one 36/40-key QWERTY keypad
DC/DC Converter for negative supply for LCDs
Connection for external contrast adjustment control  More info...

                 
AIM104-Motion-1Opto-IN     8 Bit        
8-bit PC/104 module, based on HCTL-1100 device
Single axis, brushed DC servo or stepper motor control, on-board driver up to 1A
Incremental encoder input (single/differential) for closed loop
Opto-isolated inputs: Limit1, limit2, Stop, Home
Selectable motor current limit; programmable digital filter
Control modes: position, velocity, trapezoidal profile  More info...

                 
AIM104-MULTI-IOA/D + Opto-IN + D/A 16 A/D   2 D/A   8*Opto-IN
12-bit ADC inputs, link-selectable as either 16 single-ended or eight differential channels
All digital inputs include a fixed 10mS input debounce filter
Maximum acquisition rate: 500Hz   More info...

                 
AIM104-OUT16Opto-Out       16 Opto-Out -30V Protection Diode
16 opto-isolated Darlington driver outputs
18V max load operating voltage (NOTE: APN31)
Catch diode on all outputs for protection when driving inductive loads
Module access LED   More info...

                 
AIM104-RELAY8/IN8Relais/Opto 8 Opto-IN 10-30V 8 Relais -48V/1A  
8 changeover relays
Normally Closed (NC) and Normally Open (NO) contacts available
Relay drivers optionally disabled on power-up and reset
Read-back status register
8 opto-isolated digital inputs
10mS input debounce filters (link selectable)  More info...

                 
AIM104-RELAY8/IN8Relais/Opto 8 Opto-IN 10-30V 8 Relais -48V/1A  
8 changeover relays
Normally Closed (NC) and Normally Open (NO) contacts available
Relay drivers optionally disabled on power-up and reset
Read-back status register
8 opto-isolated digital inputs
10mS input debounce filters (link selectable)  More info...

                 
AIM104-RTCRTC-Clock 1 Clock          
RTC with 100-year calendar for sec, min, hr, day of week, date of month, month, year (leap year correction)
Totally non-volatile, with 10yrs operation without power
Three programmable interrupt alarms: time of day; periodic; end of update cycle   More info...

                 
AIM104-VGACRTVGA SVGA           Resolution from 640x480 up to 1280X1024
100% compatible S-VGA CRT display adaptor
Cirrus GD542X Controller
1Mbyte on-board Video RAM
Standard 15-way 'D'-type connector
Alternative ribbon cable header
Supports graphics modes from 640x480 in 16M colours, up to 1280x1024 in 16 colours, maximum resolution   More info...

                 
AIM104-VGALCD-3VGA LCD   1MB DRAM       Resolution from 640x480 up to 1280x1024
100% compatible S-VGA flat panel and CRT display adaptor
Cirrus Logic CL-6235 Controller
512Kbyte on-board Video RAM
Supports graphics modes from 640x480 in 4096 colours, up to 1224x768 in 16 colours, maximum resolution   More info...