QUANCOM SEROPTO32IO - QUANCOM® Seriell Opto Module with 32 x isolated inputs and 32 x isolated outputs

SEROPTO32IO - QUANCOM® Seriell Opto Module with 32 x isolated inputs and 32 x isolated outputs

Seriell 32 Opto In + 32 Opto Out
Timeout detection
64 LEDs signal the state of all inputs and outputs
Simple assembly, as a stand equipment in the laboratory area or as a mobile equipment with a notebook
Fast and precise recording and processing of switching events (Input edge detection)
External power supply of 12-24 V
CD contains drivers for Vista / Windows XP / 2000 / ME / 98 / 95 / Linux
Samples for Visual-Studio .NET, Visual Basic, Visual-C, C, C++, Borland Delphi, Borland C, HP VEE respectively Agilent Vee, Labview

Price: 622,37 Euro

The QUANCOM® SEROPTO32IO Board has 32 opto inputs and 32 opto outputs and is designed for industrial purposes.

Optocouplers protecting the inputs up to 500 Volts

All inputs are protected by optocouplers. This ensures protection for your personal computer in heavy electrically polluted environment. These optocouplers are designed as AC-optocouplers which means that the polarity of the input signal makes no difference. Also all the inputs have no common ground, so that each of the inputs signals may have a different ground-signal. If you want to have an input range from 5V to 12V you may tell us with your order. The default input range is 12V to 30V.

Input edge detection

The 32 inputs are equiped with input flipflops which detect quick input state changes or remove switch bounce. This allows the detection of fast input changes. It is also possible to generate an interrupt if an input changes.

Timeout control

The board has a configurable onboard timeout control which detects all writes to the SEROPTO32IO Seriell Module. If the software hangs and the board isn't controlled by the personal computer the outputs are switched off. Think about a heating which overheats or even burns because the PC is "to busy" to switch the heating off. You may setup the timeout-time from 1ms to 16 hours in different steps. This feature can be switched off by a software command.

Software library

VB SEROPTOREL32 example
The SEROPTO32IO example shows the programming with Visual Basic
You need no knowledge in the driver development. We implemented an command set which is the same for all operating systems. An application that controls the SEROPTO32IO, and which is generated for Windows 98 can be used directly on a Windows XP PC.

With the QLIB it is easy to create applications with Visual-Studio .NET, Visual-Basic, Borland Delphi or other modern compilers. Even an interface to MS Excel, MS Access or Sun Java is available. We included the VB SEROPTOREL32 Sample which shows how to program and test the card and it also includes the source code. This is a good starting point for your own applications.

The SEROPTO32IO is also available outputs as SEROPTOREL32 .

Technical Data
•Inputs	inputs: 32 opto-isolated (24V) optional: 5 V / 12 V / 18 V / 30 V

•Outputs	opto isolates 32 max. 100 mA per channel bias-reducing potential: 0..30 V

•Bus	Ser

•Temperature Range	0...50 °C

Documentation
	Manual_englisch_usbadpeth [Download 1,8MB]

Included drivers
	QLIB 2.4.0.387 QLIB for Windows 7 / Vista / XP / 2000 / 2003 / 2008 Supports 32 Bit Windows Operating Systems 32 Bit Version of our QUANCOM Driver Library. It supports hardware access through the QLIB advanced programming interface (API). The QLIB includes drivers and include files that make it possible to control the hardware by the use of Visual Basic, Visual C, LabView, Delphi, Borland C, MS Excel / Access and Java. The following modules are not supported by this version: PAR8R, PAR8O, PAR48IO, PAR12AD, PAR16AD, PAR2DA and PCI-EXT64 [Download 10MB]

	QLIB 2.4.0.387 QLIB for Windows 7 / Vista / XP / 2000 / 2003 / 2008 Supports 64 Bit operating systems 64 Bit Version of the QUNACOM Driver Library. It supports hardware access through the QLIB advanced programming interface (API). The QLIB includes drivers and include files that make it possible to control the hardware by the use of Visual Basic, Visual C, LabView, Delphi, Borland C, MS Excel / Access and Java. The following modules are not supported by this version: PAR8R, PAR8O, PAR48IO, PAR12AD, PAR16AD, PAR2DA and PCI-EXT64 [Download 13,4MB]

	QLIB 1.9.8s QLIB for Windows XP/2000/NT4.0/ME/98/95 Newest 32-Bit-Version of the QLIB (QUANCOM Driver Library) - Common API that allows programmers to access the hardware - The QLIB contains the nescessary drivers and include files to access the hardware from MS Visual-Basic, MS Visual-C, National Instruments LabView, Agilent VEE, Delphi, Borland-C, MS Excel, MS Access and Sun Java ( Watchdog Boards ). [Download 69,5MB]

	QLIB Samples 2.4.165 QLIB Samples for Windows Vista/XP/2000 Installation package for QLIB sample projects. This package contains sample projects and programs for the following IDEs and graphical programming systems. IDEs Visual-Studio VB .NET Visual-Studio C# .NET Visual C++ Visual Basic Borland C++ Builder Borland Delphi Sun Java Graphical Programming Agilent VEE LabView Additionally there are samples included which show how to communicate using QUANCOM modules with MS Office products. Office Products MS Excel MS Access [Download 80,3MB]

	QLIB Remote Server 1.2 QLIB Remote Server 1.2 for Windows XP / 2000 / NT 4.0 / ME / 98 / 95 The QLIB remote server offers the possibility to manage QUANCOM hardware over TCP/IP connections. [Download 3,7MB]

Included Programs
	Current Firmware 1.34 Current Firmware and Flasher-Program for USB-Modules Flasher Manual [Download 20,7KB]

Available accessories
•Hutschiene	Top-Hat Rail

•KAB-DSUB-9	manufactured D-SUB cable 9pol.

•MODSSR230*1	230Volt solid state relay for DIN rail assembly

•NT12V/3A	Compact power supply

•NT24V/2A	Compact power supply

•SEN-DREH1	Revolution sensor

•SEN-OBJ1	Object sensor

... back to home

Updated on 7.5.2009 by Anton Bergmann