|
SEROPTOREL32 - QUANCOM® Seriell Relay Module with 32 opto inputs + 32 relays
- Seriell 32 Opto In + 32 Relay Card
- Special Features: Input edge detection (32 Flipflops through software readable), Timeout detection ( switches all outputs off if software hangs ), IRQ on change of input signal
- Fast and precise recording and processing of switching events
- 64 LED´s for optical function control of all in- and output signals
- Simple assembly in a rack, as a standalone equipment in the laboratory area or as a mobile equipment for a notebook
- External power supply of 12-24 V
- Up to 32 USBOPTOREL supported
- CD contains drivers for Windows Vista / XP / 2000 / ME / 98 / 95 / Linux
- Samples for .NET, Visual Basic, Visual-C/C++, Borland Delphi, Borland Builder, Labview, Sun Java, HP VEE respectively Agilent Vee, LabWindows/CVI and Linux 2.4.x & 2.6.x Kernel
|
 |
|
The QUANCOM® USBOPTOREL32 Board has 32 opto inputs and 32 relays and is designed for industrial purposes.
Optocouplers protecting the inputs up to 500 Volts
All inputs are protected by optocouplers. This ensures protection for your personal computer in heavy electrically polluted environment. These optocouplers are designed as AC-optocouplers which means that the polarity of the input signal makes no difference. Also all the inputs have no common ground, so that each of the inputs signals may have a different ground-signal. If you want to have an input range from 5V to 12V you may tell us with your order. The default input range is 12V to 30V.
Input edge detection
The 32 inputs are equiped with input flipflops which detect quick input state changes or remove switch bounce. This allows the detection of fast input changes.
Timeout control
The board has a configurable onboard timeout control which detects all writes to the SEROPTOREL32 Seriell Module. If the software hangs and the board isn't controlled by the personal computer the outputs are switched off. Think about a heating which overheats or even burns because the PC is "to busy" to switch the heating off. You may setup the timeout-time from 1ms to 16 hours in different steps. This feature can be switched off by a software command.
Software library
 | | |  The SEROPTOREL32 example shows the programming with Visual Basic |
| |
You need no knowledge in the driver development. We implemented an command set which is the same for all operating systems. An application that controls the SEROPTOREL32, and which is generated for Windows 98 can be used directly on a Windows XP PC.
With the QLIB it is easy to create applications with Visual-Studio .NET, Visual-Basic, Borland Delphi or other modern compilers. Even an interface to MS Excel, MS Access or Sun Java is available. We included the VB SEROPTOREL32 Sample which shows how to program and test the card and it also includes the source code. This is a good starting point for your own applications.
The SEROPTOREL32 is also available as SEROPTO32IO .
|
Documentation
|
|
Manual_englisch_usbadpeth
[Download 1,8MB]
|
Included drivers
|
  
|
QLIB 2.4.165 QLIB for Windows Vista/XP/2000
Supports Windows Vista
Newest 32-Bit-Version of the QLIB (QUANCOM Driver Library) - Common API that allows programmers to access the hardware - The QLIB contains the nescessary drivers and include files to access the hardware from MS Visual-Basic, MS Visual-C, National Instruments LabView, Agilent VEE, Delphi, Borland-C, MS Excel, MS Access and Sun Java ( Watchdog Boards ).
This version does not support the following products: PAR8R;PAR8O;PAR48IO;PAR12AD;PAR16AD;PAR2DA and PCI-EXT64 [Download 6,9MB]
|  |
|
QLIB 2.4.170 QLIB for Windows 7 / Vista / XP / 2000 / 2003 / 2008
Supports Windows Vista and Windows 7
32 Bit Version of our QUANCOM Driver Library. It supports hardware access through the QLIB advanced programming interface (API). The QLIB includes drivers and include files that make it possible to control the hardware by the use of Visual Basic, Visual C, LabView, Delphi, Borland C, MS Excel / Access and Java.
The following modules are not supported by this version: PAR8R, PAR8O, PAR48IO, PAR12AD, PAR16AD, PAR2DA and PCI-EXT64 [Download 6,9MB]
| |
|
QLIB 2.4.170 QLIB for Windows 7 / Vista / Server 2003 / Server 2008 ( 64-Bit )
Supports 64 Bit operating systems
64 Bit Version of the QUNACOM Driver Library. It supports hardware access through the QLIB advanced programming interface (API). The QLIB includes drivers and include files that make it possible to control the hardware by the use of Visual Basic, Visual C, LabView, Delphi, Borland C, MS Excel / Access and Java.
The following modules are not supported by this version: PAR8R, PAR8O, PAR48IO, PAR12AD, PAR16AD, PAR2DA and PCI-EXT64 [Download 6,6MB]
| |
|
QLIB 1.9.8s QLIB for Windows XP/2000/NT4.0/ME/98/95
Newest 32-Bit-Version of the QLIB (QUANCOM Driver Library) - Common API that allows programmers to access the hardware - The QLIB contains the nescessary drivers and include files to access the hardware from MS Visual-Basic, MS Visual-C, National Instruments LabView, Agilent VEE, Delphi, Borland-C, MS Excel, MS Access and Sun Java ( Watchdog Boards ). [Download 69,5MB]
| |
|
QLIB Samples 2.4.165 QLIB Samples for Windows Vista/XP/2000
Installation package for QLIB sample projects.
This package contains sample projects and programs for the following IDEs and graphical programming systems.
IDEs
- Visual-Studio VB .NET
- Visual-Studio C# .NET
- Visual C++
- Visual Basic
- Borland C++ Builder
- Borland Delphi
- Sun Java
Graphical Programming
Additionally there are samples included which show how to communicate using QUANCOM modules with MS Office products.
Office Products
[Download 80,3MB]
| |
|
QLIB Remote Server 1.2 QLIB Remote Server 1.2 for Windows XP / 2000 / NT 4.0 / ME / 98 / 95
The QLIB remote server offers the possibility to manage QUANCOM hardware over TCP/IP connections. [Download 3,7MB]
|
... back to home
Updated on 9.7.2009 by Michael Reimer
|
|
|
|