|
USB-GPIB-1 - QUANCOM® USB GPIB / IEEE-488.2 Interface
- USB GPIB Module
- This Card is also available as ISA GPIB Controller Card and PCI GPIB Controller Card
- Integrated Hardware FIFO
- Controller for 15 GPIB devices
- The driver software allows the operation of up to 8 GPIB cards in one PC
- CD-Rom with Drivers for XP / 2000 / ME / 98 included
- Sample Programs for Microsoft Windows Visual-Basic, Visual-C++, Borland C/C++, Delphi, LabView
- GPIB Cable
- 5 years warranty
|
 |
|
The handy QUANCOM USB IEEE-488 2 / GPIB Module converts any PC with a USB interface into a GPIB Bus Controller. The Module can be connected to the PC with up to 15 peripheral devices having IEEE488 interfaces.
The board is supported by the QLIB ( QUANCOM Driver Library ) and therefore programmable with most modern compilers and interpreters.
You need no knowledge in the driver development.
We implemented an command set which is the same for all operating systems. An application that uses our USB GPIB Module, which is generated for Windows 95 can be used directly on a Windows XP PC.
The board is supported by the QLIB ( QUANCOM Driver Library ) and therefore programmable with most modern compilers and interpreters.
You need no knowledge in the driver development.
 | | |  This project shows how to program the card in Microsoft Visual-Basic |
| |
We implemented an command set which is the same for all operating systems. An application that uses our GPIB Card, which is generated for Windows 98 can be used directly on a Windows XP PC.
With the QLIB it is easy to create applications with Visual-Basic, Visual-C, Borland Delphi or other modern compilers. Even an interface to MS Excel, MS Access, HP VEE ( 3.1,4.0 and 5.0 ) or NI LabVIEW 4.0 thru LabVIEW 6.i is available. We included the VB GPIB Sample which shows how to program and test the card and it also includes the source code. This is a good starting point for your own applications.
The QLIB is a API which provides it's functions through a Windows DLL, so it is possible to use QLIB with all applications that allow access to external DLL Functions.
The following functions are available for the control of GPIB devices:
• Reading devices
• Writing devices
• Reading the status of the SRQ line ( The SRQ line is used by HPIB devices to interrupt the Active Controller, which then performs a Serial Poll or Parallel Poll to determine which device requested service, and why. The poll clears the SRQ. )
• Controlling Remote / Local Mode
• Polling the status byte ( In a serial poll, the Active Controller asks each device in turn to send back a status byte that indicates whether the device has asserted the SRQ. )
• Supported commands ( GTL = Goto Local, SDC = Selected Device Clear, GET = Group Execute Trigger, LLO = Local Lockout, DCL = Device Clear, Serial Poll Enable, Serial Poll Disable, UNL = Unlisten, UNT = Untalk )
Optional: GPIB Cable
|
Documentation
|
|
Manual_english_GPIB1
[Download 2,7MB]
|
Samples/Sources and QLIB commands
|
|
Sample Source for Borland Delphi
This sample shows how to program the GPIB Controller Board. It includes the following functions: Sending string, receiving string, send commands, serial poll devices and reading the state of the SRQ line. [View Source]
|  |
|
Sample Source for Visual-C/C++
This sample shows how to program the GPIB Controller Board. It includes the following functions: Sending string, receiving string, send commands, serial poll devices and reading the state of the SRQ line. [View Source]
| |
|
Sample Source for National Instruments LabWindows/CVI
This sample shows how to program the GPIB Controller Board. It includes the following functions: Sending string, receiving string, send commands, serial poll devices and reading the state of the SRQ line. [View Source]
| |
|
Sample Source for Visual-Basic
This sample shows how to program the GPIB Controller Board. It includes the following functions: Sending string, receiving string, send commands, serial poll devices and reading the state of the SRQ line. [View Source]
| |
|
Sample Source for Lotus Notes
This sample shows how to program the GPIB Controller Board under Lotus Notes. It includes the following functions: Sending string, receiving string, send commands, serial poll devices and reading the state of the SRQ line. [View Source]
|
Included drivers
|
  
|
QLIB 2.4.0.387 QLIB for Windows 7 / Vista / XP / 2000 / 2003 / 2008
Supports 32 Bit Windows Operating Systems
32 Bit Version of our QUANCOM Driver Library. It supports hardware access through the QLIB advanced programming interface (API). The QLIB includes drivers and include files that make it possible to control the hardware by the use of Visual Basic, Visual C, LabView, Delphi, Borland C, MS Excel / Access and Java.
The following modules are not supported by this version: PAR8R, PAR8O, PAR48IO, PAR12AD, PAR16AD, PAR2DA and PCI-EXT64 [Download 10335,6KB]
| |
|
QLIB 2.4.0.387 QLIB for Windows 7 / Vista / XP / 2000 / 2003 / 2008
Supports 64 Bit operating systems
64 Bit Version of the QUNACOM Driver Library. It supports hardware access through the QLIB advanced programming interface (API). The QLIB includes drivers and include files that make it possible to control the hardware by the use of Visual Basic, Visual C, LabView, Delphi, Borland C, MS Excel / Access and Java.
The following modules are not supported by this version: PAR8R, PAR8O, PAR48IO, PAR12AD, PAR16AD, PAR2DA and PCI-EXT64 [Download 13747,5KB]
| |
|
QLIB 1.9.8s QLIB for Windows XP/2000/NT4.0/ME/98/95
Newest 32-Bit-Version of the QLIB (QUANCOM Driver Library) - Common API that allows programmers to access the hardware - The QLIB contains the nescessary drivers and include files to access the hardware from MS Visual-Basic, MS Visual-C, National Instruments LabView, Agilent VEE, Delphi, Borland-C, MS Excel, MS Access and Sun Java ( Watchdog Boards ). [Download 71251,6KB]
| |
|
QLIB Samples 2.4.165 QLIB Samples for Windows Vista/XP/2000
Installation package for QLIB sample projects.
This package contains sample projects and programs for the following IDEs and graphical programming systems.
IDEs
- Visual-Studio VB .NET
- Visual-Studio C# .NET
- Visual C++
- Visual Basic
- Borland C++ Builder
- Borland Delphi
- Sun Java
Graphical Programming
Additionally there are samples included which show how to communicate using QUANCOM modules with MS Office products.
Office Products
[Download 82234KB]
| |
|
Drivers and sample programs for Kernel 2.6.x Version 1.3.3 USBOPTO,USBREL,USBWDOG,USB-GPIB
This archive includes drivers and sample programs to communicate with our USB modules under Linux kernel 2.6.x. [Download 52,4KB]
| |
|
USB driver and Linux software for Kernel 2.6.x Version 1.3.4 / USBOPTO,USBREL,USBWDOG,USB-GPIB
Contains the driver that was initially ported by Marc van Selms for kernel 2.6.x.  Further information for the driver installation (only in German at the moment). This driver contains kernel drivers and sample programs for all QUANCOM USB Modules. [Download 90,2KB]
| |
|
QLIB Remote Server 1.2 QLIB Remote Server 1.2 for Windows XP / 2000 / NT 4.0 / ME / 98 / 95
The QLIB remote server offers the possibility to manage QUANCOM hardware over TCP/IP connections. [Download 3846,6KB]
|
Included Programs
|
|
Borland Delphi Sample for the ISA GPIB-1, USB GPIB and the PCI GPIB Cards
Borland Delphi Sample Project. This project shows how to control the GPIB Adapter. The sample contains functions to read, write and serial poll a GPIB device on the bus. It also shows the checking of SRQ line. [Download 32,1KB]
| |
|
LabWindows/CVI Sample for the ISA GPIB-1, USB GPIB and the PCI GPIB Cards
LabWindows Sample Project. This project shows how to control the GPIB Adapter. The sample contains functions to read, write and serial poll a GPIB device on the bus. It also shows the checking of SRQ line. [Download 19,3KB]
| |
|
Visual-Basic Sample for the ISA GPIB-1, USB GPIB and the PCI GPIB Cards
Visual Basic 6.0 Sample Project. This project shows how to control the GPIB Adapter. The sample contains functions to read, write and serial poll a GPIB device on the bus. It also shows the checking of SRQ line. [Download 16,5KB]
| |
|
Visual C/C++ Sample for the ISA GPIB-1, USB GPIB and the PCI GPIB Cards
Visual C/C++ 6.0 Sample Project. This project shows how to control the GPIB Adapter. The sample contains functions to read, write and serial poll a GPIB device on the bus. It also shows the checking of SRQ line. [Download 44KB]
| |
|
Visual C# .NET Sample
Visual C# .NET Sample Project. This project shows how to control the GPIB Adapter. The sample contains functions to read, write and serial poll a GPIB device on the bus. It also shows the checking of SRQ line. [Download 20,3KB]
| |
|
Visual Basic .NET GPIB Sample
Visual Basic .NET Sample Project. This project shows how to control the GPIB Adapter. The sample contains functions to read, write and serial poll a GPIB device on the bus. It also shows the checking of SRQ line. [Download 16,7KB]
|
Available accessories
|
•GPIB-K2
|
GPIB cable, IEEE-488-cable
| |
... back to home
Updated on 28.5.2009 by Michael Reimer
|
|
|
|