|
USBREL8 - QUANCOM® USB Relay Module with 8 relays
- USB 8 Channel Relay Module
- 8 LED's visualizing the state of the output lines
- Simple assembly in a rack, as a standalone equipment in the laboratory area or as a mobile equipment for a notebook
- Up to 4 x modules in one PC System supported
- No external power supply required
- Samples for .NET, Visual Basic, Visual-C/C++, Borland Delphi, Borland Builder, Labview, Sun Java, LabWindows/CVI and Linux 2.4.x & 2.6.x Kernel
- CD-Rom with Windows XP / 2000 / 98 / ME / Linux drivers
|
 |
|
The QUANCOM® USBREL8 is a Plug & Play module with 8 DIL Reed relays. The maximum load for the relays is 1 Amp / 15 W. This USB module is also available as USB 16 relay module with 16 optocoupler inputs.
You can use the module as freestanding device in the laboratory environment, as mobile equipment connected to a Notebook or it can be mounted to a top-hat rail i.e. for the use in a rack system.
USBREL8 has a plugable connector to connect and disconnect the module easily from your external circuits without using a screw driver.
The state of all relays is visualised through the onboard LED's. The configuration LED shows that the module has power and if it is initialized by the driver. Up to 4 modules can be used at the same time. The module can be identified by a module address which is set by jumpers onboard.
The USBREL8 board is supported by QLIB (QUANCOM Driver Library) which makes an easy programming under Windows XP, 2000, 98, Agilent Vee and LabView possible. We implemented a command set which is usable for all operating systems. An application generated for Windows 98 can be used directly on a Windows XP PC. You don't need any experience in driver development to program this device.
The Linux drivers allow the use of USBREL8 under Linux Kernel Revisions 2.2.X or 2.4.X. We have included a Mini-QLIB implementation to the drivers archive.
The USBREL8 is also available as PCI relay card with 16 relays and 16 optocoupler inputs, OPTOREL16 or as USB 16 relay module with 16 optocoupler inputs
|
Documentation
|
|
Manual_english_usbrel8_usbopto8
[Download 1,5MB]
|
Example-Projects
|
|
Example for writing to the digital outputs in Borland Builder
[Download 449,3KB]
|  |
|
Example for writing to the digital outputs in Visual C# .NET
[Download 14,2KB]
| |
|
Example for writing to the digital outputs in Delphi
[Download 16,4KB]
| |
|
Example for writing to the digital outputs in Delphi
[Download 19KB]
| |
|
Example for writing to the digital outputs in Java
[Download 1,6KB]
| |
|
Example for including in Labview
[Download 8,4KB]
| |
|
Example for writing to the digital outputs in LabWindows / CVI
[Download 21,5KB]
| |
|
Example for writing to the digital outputs in Visual-Basic
[Download 9KB]
| |
|
Example: USBREL8_vb_remote.zip
[Download 21,6KB]
| |
|
Example for Visual-Basic
[Download 13,5KB]
| |
|
Example for writing to the digital outputs in Visual-Basic.net
[Download 16,3KB]
| |
|
Example for writing to the digital outputs in C/C++
[Download 26,5KB]
| |
|
Example for writing to the digital outputs in Visual C++ .NET
[Download 0,2KB]
|
Included drivers
|
|
USB Driver Linux Software for Suse 8.1
Contains the drivers for all the QUANCOM USB modules including sample programs. [Download 36,9KB]
| |
|
USB Driver Linux Software for the Kernel 2.6.x
Contains the by Marc van Selms ported driver for all the QUANCOM USB modules including sample programs. [Download 44,7KB]
| |
  
|
QLIB 2.4.0.387 QLIB for Windows 7 / Vista / XP / 2000 / 2003 / 2008
Supports 32 Bit Windows Operating Systems
32 Bit Version of our QUANCOM Driver Library. It supports hardware access through the QLIB advanced programming interface (API). The QLIB includes drivers and include files that make it possible to control the hardware by the use of Visual Basic, Visual C, LabView, Delphi, Borland C, MS Excel / Access and Java.
The following modules are not supported by this version: PAR8R, PAR8O, PAR48IO, PAR12AD, PAR16AD, PAR2DA and PCI-EXT64 [Download 10335,6KB]
| |
|
QLIB 2.4.0.387 QLIB for Windows 7 / Vista / XP / 2000 / 2003 / 2008
Supports 64 Bit operating systems
64 Bit Version of the QUNACOM Driver Library. It supports hardware access through the QLIB advanced programming interface (API). The QLIB includes drivers and include files that make it possible to control the hardware by the use of Visual Basic, Visual C, LabView, Delphi, Borland C, MS Excel / Access and Java.
The following modules are not supported by this version: PAR8R, PAR8O, PAR48IO, PAR12AD, PAR16AD, PAR2DA and PCI-EXT64 [Download 13747,5KB]
| |
|
QLIB 1.9.8s QLIB for Windows XP/2000/NT4.0/ME/98/95
Newest 32-Bit-Version of the QLIB (QUANCOM Driver Library) - Common API that allows programmers to access the hardware - The QLIB contains the nescessary drivers and include files to access the hardware from MS Visual-Basic, MS Visual-C, National Instruments LabView, Agilent VEE, Delphi, Borland-C, MS Excel, MS Access and Sun Java ( Watchdog Boards ). [Download 71251,6KB]
| |
|
QLIB Samples 2.4.165 QLIB Samples for Windows Vista/XP/2000
Installation package for QLIB sample projects.
This package contains sample projects and programs for the following IDEs and graphical programming systems.
IDEs
- Visual-Studio VB .NET
- Visual-Studio C# .NET
- Visual C++
- Visual Basic
- Borland C++ Builder
- Borland Delphi
- Sun Java
Graphical Programming
Additionally there are samples included which show how to communicate using QUANCOM modules with MS Office products.
Office Products
[Download 82234KB]
| |
|
Drivers and sample programs for Kernel 2.6.x Version 1.3.3 USBOPTO,USBREL,USBWDOG,USB-GPIB
This archive includes drivers and sample programs to communicate with our USB modules under Linux kernel 2.6.x. [Download 52,4KB]
| |
|
USB driver and Linux software for Kernel 2.6.x Version 1.3.4 / USBOPTO,USBREL,USBWDOG,USB-GPIB
Contains the driver that was initially ported by Marc van Selms for kernel 2.6.x.  Further information for the driver installation (only in German at the moment). This driver contains kernel drivers and sample programs for all QUANCOM USB Modules. [Download 90,2KB]
| |
|
QLIB Remote Server 1.2 QLIB Remote Server 1.2 for Windows XP / 2000 / NT 4.0 / ME / 98 / 95
The QLIB remote server offers the possibility to manage QUANCOM hardware over TCP/IP connections. [Download 3846,6KB]
|
... back to home
Updated on 7.5.2009 by Anton Bergmann
|
|
|
|