|
USBOPTO64OUT - QUANCOM® USB Opto Module with 64 Outputs
- USB 64 Opto Out Card
- 64 LED´s for optical function control of all output signals
- Timeout detection ( switches all outputs off if software hangs )
- Simple assembly in a rack, as a standalone equipment in the laboratory area or as a mobile equipment for a notebook
- External power supply of 12 V possible
- Up to 32 USBOPTOREL supported
- CD contains drivers for Windows XP / 2000 / ME / 98 / 95 / Linux
- Samples for .NET, Visual Basic, Visual-C/C++, Borland Delphi, Borland Builder, Labview, Sun Java, Agilent VEE, LabWindows/CVI and Linux 2.4.x & 2.6.x Kernel
- 5 years warranty
|
 |
|
The QUANCOM® USBOPTO64OUT board has 64 opto outputs and is designed for industrial purposes.
Timeout control
The board has a configurable onboard timeout control which detects every timeout or software crash to the USBOPTO64OUT USB Module. If the software hangs and the board isn't controlled by the personal computer the outputs are switched off. Think about a heating which overheats because the PC is "to busy" to switch the heating off. You may setup the timeout-time from 1ms to 16 hours in different steps. This feature can be switched off by a software command.
Additional Features
As all USB Optocoupler Relaymodules each channel has its own optical indicator through a LED. Through 4 additional Status-LEDs the state of the module is allways readable.
By mounting the module on to a top-hat rail the installation is very simple. You may order the needed rail in our shop, too.
An external 12V to 30V power supply is not needed to operate this module, but recommended. Also these power supplies may be ordered at our house. You may choose between our 12V/3A or 24V/2A.
By using the dip switch located on the mainboard the address of the module is configureable from 0 to 7. This address is used to identify the module in our QLIB if more than one module of the same type is used. You also have the possibility to configure this address by using our software tool which is downloadable on our website. Please note that the firmware installed on the module has to be above version 1.30 in order let the softwrae configure the address.
Software library
 | | |  The USBOPTO64OUT example shows the programming with Visual Basic |
| |
You need no knowledge in driver development. We implemented a command set which is usable for all operating systems. An application that controls the USBOPTO64OUT, and which is generated for Windows 98 can be used directly on a Windows XP PC.
With the QLIB it is easy to create applications with Visual-Studio .NET, Visual-Basic, Borland Delphi or other modern compilers. Even an interface to MS Excel, MS Access or Sun Java is available. We included the VB USBOPTO64OUT example which shows how to program and test the card. It also includes the source code. This is a good starting point for your own applications.
The USBOPTO64OUT is also available as USBOPTO64IN and USBREL64 .
|
Documentation
|
|
Manual_english_USBOPTO64_32_16_8
[Download 1,8MB]
|
Included drivers
|
  
|
QLIB 2.4.0.387 QLIB for Windows 7 / Vista / XP / 2000 / 2003 / 2008
Supports 32 Bit Windows Operating Systems
32 Bit Version of our QUANCOM Driver Library. It supports hardware access through the QLIB advanced programming interface (API). The QLIB includes drivers and include files that make it possible to control the hardware by the use of Visual Basic, Visual C, LabView, Delphi, Borland C, MS Excel / Access and Java.
The following modules are not supported by this version: PAR8R, PAR8O, PAR48IO, PAR12AD, PAR16AD, PAR2DA and PCI-EXT64 [Download 10335,6KB]
|  |
|
QLIB 2.4.0.387 QLIB for Windows 7 / Vista / XP / 2000 / 2003 / 2008
Supports 64 Bit operating systems
64 Bit Version of the QUNACOM Driver Library. It supports hardware access through the QLIB advanced programming interface (API). The QLIB includes drivers and include files that make it possible to control the hardware by the use of Visual Basic, Visual C, LabView, Delphi, Borland C, MS Excel / Access and Java.
The following modules are not supported by this version: PAR8R, PAR8O, PAR48IO, PAR12AD, PAR16AD, PAR2DA and PCI-EXT64 [Download 13747,5KB]
| |
|
QLIB 1.9.8s QLIB for Windows XP/2000/NT4.0/ME/98/95
Newest 32-Bit-Version of the QLIB (QUANCOM Driver Library) - Common API that allows programmers to access the hardware - The QLIB contains the nescessary drivers and include files to access the hardware from MS Visual-Basic, MS Visual-C, National Instruments LabView, Agilent VEE, Delphi, Borland-C, MS Excel, MS Access and Sun Java ( Watchdog Boards ). [Download 71251,6KB]
| |
|
QLIB Samples 2.4.165 QLIB Samples for Windows Vista/XP/2000
Installation package for QLIB sample projects.
This package contains sample projects and programs for the following IDEs and graphical programming systems.
IDEs
- Visual-Studio VB .NET
- Visual-Studio C# .NET
- Visual C++
- Visual Basic
- Borland C++ Builder
- Borland Delphi
- Sun Java
Graphical Programming
Additionally there are samples included which show how to communicate using QUANCOM modules with MS Office products.
Office Products
[Download 82234KB]
| |
|
Drivers and sample programs for Kernel 2.6.x Version 1.3.3 USBOPTO,USBREL,USBWDOG,USB-GPIB
This archive includes drivers and sample programs to communicate with our USB modules under Linux kernel 2.6.x. [Download 52,4KB]
| |
|
USB driver and Linux software for Kernel 2.6.x Version 1.3.4 / USBOPTO,USBREL,USBWDOG,USB-GPIB
Contains the driver that was initially ported by Marc van Selms for kernel 2.6.x.  Further information for the driver installation (only in German at the moment). This driver contains kernel drivers and sample programs for all QUANCOM USB Modules. [Download 90,2KB]
| |
|
QLIB Remote Server 1.2 QLIB Remote Server 1.2 for Windows XP / 2000 / NT 4.0 / ME / 98 / 95
The QLIB remote server offers the possibility to manage QUANCOM hardware over TCP/IP connections. [Download 3846,6KB]
|
... back to home
Updated on 15.5.2009 by Michael Reimer
|
|
|
|