|
USBOPTO8 - QUANCOM® USB Opto Module with 8 opto inputs
- USB Module with 8 Opto-In
- 8 Isolated inputs ( 5V...30V )
- All inputs signal states shown by 8 LED´s
- Simple assembly, as a standalone equipment in the laboratory area or as a mobile equipment with a notebook
- Up to 4 x modules in one PC System supported
- Power supply over USB
- Samples for Visual-Studio .NET, Visual Basic, Visual C/C++, Delphi, Agilent Vee, Labview, LabWindows/CVI
- CD-Rom with Windows XP / 2000 / 98 / 95 / ME drivers / Linux
|
 |
|
The QUANCOM® USBOPTO8 Opto Board has 8 inputs. Your personal computer is protected against damage in case of overvoltage by galvanic isolation. These optocouplers are designed as alternating current optocouplers which means that you can choose the polarity of input signals optionally . You can also accommodate the input voltage range individually. If you want to have an input range from 5V to 12V feel free to tell us in your order. The default input range is 12V to 30V..
You can use the module as freestanding device in the laboratory environment, as mobile equipment connected to a notebook or it can be mounted to a top-hat rail i.e. for the use in a rack system.
The USBOPTO8 has a plugable connector to connect and disconnect the module easily from your external circuits without using a screw driver.
The state of the inputs are visualised through the onboard LED's. The configuration LED shows that the module has power and if it is initialized by the driver. Up to 4 modules can be used at the same time. The module can be identified by a module address which is set by jumpers onboard.
The USBOPTO8 board is supported by the QLIB (QUANCOM Driver Library) which makes an easy programming under Windows XP, 2000, 98, Agilent Vee and LabView possible. We implemented a command set which is usable for all operating systems. An application generated for Windows 98 can be used directly on a Windows XP PC. To program this device you don't need any experience in driver development.
The Linux drivers allow the use of USBOPTO8under the Linux Kernel Revisions 2.2.X or 2.4.X. We have included a Mini-QLIB implementation to the drivers register.
The USBOPTO8 is also available as PCI relay card with 16 relays and 16 optocoupler inputs, OPTOREL16, USB 16 relay module with 16 optocoupler inputs or as USBREL8 8 Relay Module.
|
Documentation
|
|
Manual_english_usbrel8_usbopto8
[Download 1,5MB]
|
Example-Projects
|
|
Example for reading of the digital inputs in Borland Builder
[Download 449,4KB]
|  |
|
Example for reading of the digital inputs in Delphi
[Download 6,5KB]
| |
|
Example for reading of the digital inputs in Delphi
[Download 19KB]
| |
|
Example for reading of the digital inputs in Java
[Download 1,7KB]
| |
|
Example for including in Labview
[Download 7,2KB]
| |
|
Example for reading of the digital inputs in LabWindows / CVI
[Download 21,1KB]
| |
|
Example for reading of the digital inputs in Visual Basic
[Download 14,6KB]
| |
|
Example for Visual-Basic
[Download 13,5KB]
| |
A
|
Example: USBOPTO8_excel.zip
[Download 38KB]
| |
|
Example for reading of the digital inputs in Visual Basic.net
[Download 16,8KB]
| |
|
Example for reading of the digital inputs in C/C++
[Download 30,7KB]
| |
|
Example for reading of the digital inputs in Visual C++ .NET
[Download 0,2KB]
|
Included drivers
|
|
USB Driver Linux Software for Suse 8.1
Contains the drivers for all the QUANCOM USB modules including sample programs. [Download 36,9KB]
| |
|
USB Driver Linux Software for the Kernel 2.6.x
Contains the by Marc van Selms ported driver for all the QUANCOM USB modules including sample programs. [Download 44,7KB]
| |
  
|
QLIB 2.4.0.387 QLIB for Windows 7 / Vista / XP / 2000 / 2003 / 2008
Supports 32 Bit Windows Operating Systems
32 Bit Version of our QUANCOM Driver Library. It supports hardware access through the QLIB advanced programming interface (API). The QLIB includes drivers and include files that make it possible to control the hardware by the use of Visual Basic, Visual C, LabView, Delphi, Borland C, MS Excel / Access and Java.
The following modules are not supported by this version: PAR8R, PAR8O, PAR48IO, PAR12AD, PAR16AD, PAR2DA and PCI-EXT64 [Download 10335,6KB]
| |
|
QLIB 2.4.0.387 QLIB for Windows 7 / Vista / XP / 2000 / 2003 / 2008
Supports 64 Bit operating systems
64 Bit Version of the QUNACOM Driver Library. It supports hardware access through the QLIB advanced programming interface (API). The QLIB includes drivers and include files that make it possible to control the hardware by the use of Visual Basic, Visual C, LabView, Delphi, Borland C, MS Excel / Access and Java.
The following modules are not supported by this version: PAR8R, PAR8O, PAR48IO, PAR12AD, PAR16AD, PAR2DA and PCI-EXT64 [Download 13747,5KB]
| |
|
QLIB 1.9.8s QLIB for Windows XP/2000/NT4.0/ME/98/95
Newest 32-Bit-Version of the QLIB (QUANCOM Driver Library) - Common API that allows programmers to access the hardware - The QLIB contains the nescessary drivers and include files to access the hardware from MS Visual-Basic, MS Visual-C, National Instruments LabView, Agilent VEE, Delphi, Borland-C, MS Excel, MS Access and Sun Java ( Watchdog Boards ). [Download 71251,6KB]
| |
|
QLIB Samples 2.4.165 QLIB Samples for Windows Vista/XP/2000
Installation package for QLIB sample projects.
This package contains sample projects and programs for the following IDEs and graphical programming systems.
IDEs
- Visual-Studio VB .NET
- Visual-Studio C# .NET
- Visual C++
- Visual Basic
- Borland C++ Builder
- Borland Delphi
- Sun Java
Graphical Programming
Additionally there are samples included which show how to communicate using QUANCOM modules with MS Office products.
Office Products
[Download 82234KB]
| |
|
Drivers and sample programs for Kernel 2.6.x Version 1.3.3 USBOPTO,USBREL,USBWDOG,USB-GPIB
This archive includes drivers and sample programs to communicate with our USB modules under Linux kernel 2.6.x. [Download 52,4KB]
| |
|
USB driver and Linux software for Kernel 2.6.x Version 1.3.4 / USBOPTO,USBREL,USBWDOG,USB-GPIB
Contains the driver that was initially ported by Marc van Selms for kernel 2.6.x.  Further information for the driver installation (only in German at the moment). This driver contains kernel drivers and sample programs for all QUANCOM USB Modules. [Download 90,2KB]
| |
|
QLIB Remote Server 1.2 QLIB Remote Server 1.2 for Windows XP / 2000 / NT 4.0 / ME / 98 / 95
The QLIB remote server offers the possibility to manage QUANCOM hardware over TCP/IP connections. [Download 3846,6KB]
|
... back to home
Updated on 7.5.2009 by Anton Bergmann
|
|
|
|