|
USBREL64 - QUANCOM® USB Relay Module with 64 relays
- USB 64 Relay Card
- Special Features: Timeout detection ( switches all outputs off if software hangs )
- 64 LED´s for optical function control of all output signals
- Simple assembly in a rack, as a standalone equipment in the laboratory area or as a mobile equipment for a notebook
- External power supply of 12 V possible
- Up to 32 USBREL64 supported
- CD contains drivers for Windows XP / 2000 / ME / 98 / 95 / Linux
- Samples for .NET, Visual Basic, Visual-C/C++, Borland Delphi, Borland Builder, Labview, Sun Java, Agilent VEE, LabWindows/CVI and Linux 2.4.x & 2.6.x Kernel
|
 |
|
The QUANCOM® USBREL64 Board has 64 relays and is designed for industrial purposes.
Configuration Possibilities:
3A/90W: 32 SIL-Reed Relais with 3A/90W + 32 SIL-Reed Relais with 1A/15W
1A/15W: 64 SIL-Reed Relais with 1A/15W
Timeout Control
The board has a configurable onboard timeout control which detects all writes to the USBREL64 USB Module. If the software hangs and the board isn't controlled by the personal computer the outputs are switched off. Think about a heating which overheats or even burns because the PC is "to busy" to switch the heating off. You may setup the timeout-time from 1ms to 16 hours in different steps. This feature can be switched off by a software command.
Additional Features
As all USB Optocoupler Relaymodules each channel has its own optical indicator through a LED. Through 4 additional Status-LEDs the state of the module is always readable.
By mounting the module on to a top-hat rail the installation is very simple. You may order the needed rail in our shop, too.
An external 12V to 30V power supply is needed to operate this module. Also these power supplies may be ordered at our house. You may choose between our 12V/3A or 24V/2A.
By using the dip switch located on the mainboard the address of the module is configureable from 0 to 7. This address is used to identify the module in our QLIB if more than one module of the same type is used. You also have the possibility to configure this address by using our software tool which is downloadable on our website. Please note that the firmware installed on the module has to be above version 1.30 in order let the softwrae configure the address.
Software Library
 | | |  The USBREL64 example shows the programming with Visual Basic |
| |
You need no knowledge in driver development. We implemented an command set which you can use for all operating systems. An application that controls the USBREL64, and which is generated for Windows 98 can be used directly on a Windows XP PC.
With the QLIB it is easy to create applications with Visual-Studio .NET, Visual-Basic, Borland Delphi or other modern compilers. Even an interface to MS Excel, MS Access or Sun Java is available. We included the VB USBREL64 example which demonstrates how to program and test the card. It also includes the source code and it is a good starting point for your own applications.
The USBREL64 is also available as USBOPTO64OUT and USBOPTO64IN .
|
Documentation
|
|
Manual_english_USBOPTO64_32_16_8
[Download 1,8MB]
|
Included drivers
|
  
|
QLIB 2.4.165 QLIB for Windows Vista/XP/2000
Supports Windows Vista
Newest 32-Bit-Version of the QLIB (QUANCOM Driver Library) - Common API that allows programmers to access the hardware - The QLIB contains the nescessary drivers and include files to access the hardware from MS Visual-Basic, MS Visual-C, National Instruments LabView, Agilent VEE, Delphi, Borland-C, MS Excel, MS Access and Sun Java ( Watchdog Boards ).
This version does not support the following products: PAR8R;PAR8O;PAR48IO;PAR12AD;PAR16AD;PAR2DA and PCI-EXT64 [Download 7096,3KB]
|  |
|
QLIB 2.4.170 QLIB for Windows 7 / Vista / XP / 2000 / 2003 / 2008
Supports Windows Vista and Windows 7
32 Bit Version of our QUANCOM Driver Library. It supports hardware access through the QLIB advanced programming interface (API). The QLIB includes drivers and include files that make it possible to control the hardware by the use of Visual Basic, Visual C, LabView, Delphi, Borland C, MS Excel / Access and Java.
The following modules are not supported by this version: PAR8R, PAR8O, PAR48IO, PAR12AD, PAR16AD, PAR2DA and PCI-EXT64 [Download 7096,3KB]
| |
|
QLIB 2.4.170 QLIB for Windows 7 / Vista / Server 2003 / Server 2008 ( 64-Bit )
Supports 64 Bit operating systems
64 Bit Version of the QUNACOM Driver Library. It supports hardware access through the QLIB advanced programming interface (API). The QLIB includes drivers and include files that make it possible to control the hardware by the use of Visual Basic, Visual C, LabView, Delphi, Borland C, MS Excel / Access and Java.
The following modules are not supported by this version: PAR8R, PAR8O, PAR48IO, PAR12AD, PAR16AD, PAR2DA and PCI-EXT64 [Download 6820,8KB]
| |
|
QLIB 1.9.8s QLIB for Windows XP/2000/NT4.0/ME/98/95
Newest 32-Bit-Version of the QLIB (QUANCOM Driver Library) - Common API that allows programmers to access the hardware - The QLIB contains the nescessary drivers and include files to access the hardware from MS Visual-Basic, MS Visual-C, National Instruments LabView, Agilent VEE, Delphi, Borland-C, MS Excel, MS Access and Sun Java ( Watchdog Boards ). [Download 71251,6KB]
| |
|
QLIB Samples 2.4.165 QLIB Samples for Windows Vista/XP/2000
Installation package for QLIB sample projects.
This package contains sample projects and programs for the following IDEs and graphical programming systems.
IDEs
- Visual-Studio VB .NET
- Visual-Studio C# .NET
- Visual C++
- Visual Basic
- Borland C++ Builder
- Borland Delphi
- Sun Java
Graphical Programming
Additionally there are samples included which show how to communicate using QUANCOM modules with MS Office products.
Office Products
[Download 82234KB]
| |
|
Drivers and sample programs for Kernel 2.6.x Version 1.3.3 USBOPTO,USBREL,USBWDOG,USB-GPIB
This archive includes drivers and sample programs to communicate with our USB modules under Linux kernel 2.6.x. [Download 52,4KB]
| |
|
USB driver and Linux software for Kernel 2.6.x Version 1.3.4 / USBOPTO,USBREL,USBWDOG,USB-GPIB
Contains the driver that was initially ported by Marc van Selms for kernel 2.6.x.  Further information for the driver installation (only in German at the moment). This driver contains kernel drivers and sample programs for all QUANCOM USB Modules. [Download 90,2KB]
| |
|
QLIB Remote Server 1.2 QLIB Remote Server 1.2 for Windows XP / 2000 / NT 4.0 / ME / 98 / 95
The QLIB remote server offers the possibility to manage QUANCOM hardware over TCP/IP connections. [Download 3846,6KB]
|
... back to home
Updated on 5.9.2009 by Michael Reimer
|
|
|
|