QUANCOM Informationssysteme - QLIB Installation for Linux

 

For further information about how to install please follow this link.

  Installation Guide

Driver Download / Installation

 


Current Linux driver for QUANCOM USB modules. Successfully tested with kernel 3.1.4. Sample codes for controlling our devices in C are also included.

For futher information about installation of the driver follow this link
  Installation Procedures

Info: Ver. 1.4.0 | 239KB | 05.05.2011[Download]

Kernel driver for Linux from Kernel 2.2.0. The driver supports the following boards: PWDOG1, PWDOG2 and PWDOG2N. The archive contains the driver, a sample in C language and the program as executable (kernel 2.2.10).

Info: Ver. 1.00 | 17,1KB | 02.11.1999[Download]

The following program checks your Webserver ( i.e. an Apache Webserver ) for proper function. It querys a configurable number of web addresses. If there is no response or the content of the webpage is different from a configured pattern, the webserver will be rebooted by the watchdog card. In order to run this program, you need the linux watchdog card driver for Suse 7.3 ( German language only, but will be updated soon to English language).

Info: Ver. 0.02 beta | 9,7KB | 15.02.2002[Download]

Kernel driver for Linux from Kernel 2.4. The driver supports the following boards: PWDOG1, PWDOG2 and PWDOG2N. The archive contains the driver, a sample in C language and the program as executable.

Info: Ver. 1.02 | 11KB | 20.12.2002[Download]

Kernel driver for Linux from Kernel 2.4. The driver supports the following boards: PWDOG1, PWDOG2 and PWDOG2N. The archive contains the driver, a sample in C language and the program as executable.

Info: Ver. 1.01 | 10,4KB | 22.12.2001[Download]

Watchdog Kernel Driver written by Dipl. Inform. Detlef Fliegl for PWDOG1, PWDOG2 und PWDOG2N Watchdog cards. Archive contains sources and a sample program for Kernel 2.4.

Info: Ver. 1.00 | 3KB | 22.05.2001[Download]

Kernel 2.6.x Linux driver and sample programs for the PCIOPTOREL and PCIOPTO16IO.

Info: Ver. 1.1.2 | 19,8KB | 28.02.2007[Download]

This archive contains drivers and sample programs for Linux kernel 2.6.x Version 1.3.1. Now it is possible to run fastmem.c with Linux (Communicate with TTL device through C-pointer to reach up to 28MB/sec.).

Info: Ver. 1.3.1 | 26,6KB | 28.02.2007[Download]

Contains the driver that was initially ported by Marc van Selms for kernel 2.6.x.  Further information for the driver installation (only in German at the moment). This driver contains kernel drivers and sample programs for all QUANCOM USB Modules.

Info: Ver. 1.3.4 | 90,2KB | 13.10.2008[Download]

This archive includes drivers and sample programs to communicate with our USB modules under Linux kernel 2.6.x.

Info: Ver. 1.3.3 | 52,4KB | 13.02.2007[Download]

This archive includes drivers and sample programs for our PWDOG1 and PWDOG2N under Linux kernel 2.6.x.

Info: Ver. 1.1.2 | 17,5KB | 28.02.2007[Download]