Time spreading in your network with einer QUANCOM Clock77

With your QUANCOM Clock77 you are not only able to supply your own PC with an atomic clock but the whol network.
The procedure depends on your operating system.


Time synchronisation with "NET time"-command

WIht the use of the command: "NET TIME \\'Computername' /SET /YES" you can synchronise the system time with Computername. You can also use your ID instead of your computer name
Please keep in mind that the user who wants to achieve the command has to have access to "Change-System-Time" rights everytime. These rights you have to allocate with the user manager.


Example for "NET TIME" command:

NET TIME \\192.168.1.1 /SET /YES


Automation of the time synchronisation under DOS

1.The QUANCOM Clock77 has to be connected to a network.
2.Please create a batch data which includes the "NET TIME" command.
 These data includes: "NET TIME \\Timeserver /SET /YES"
 Timeserver has to be displaced through the network identification or the IP address of your PC to which the QUANCOM Clock77 is connected.
3.Please enlist this batch data in autoexec.bat.


Automatation of the time synchronisation under Windows

1.The QUANCOM Clock77 only has to be connected to one of the PC's in your network.
2.Please create a batch data which includes the "NET TIME" command.
 The data includes: "NET TIME \\Timeserver /SET /YES"
 Timeserverhas to be displaced through the network identification or the IP address of your PC to which the QUANCOM Clock77 is connected.
3.Please anlist this data in your auto start of your network.