QUANCOM PCIOPTO16IO - PCI Opto-card (16 In + 16 Out)

PCIOPTO16IO - PCI Opto-card (16 In + 16 Out)

Plug & Play PCI board
16 Opto isolated inputs ( 0...30V ) and 16 Opto isolated outputs
Special Features: Input edge detection ( 16 Flipflops through software readable ), Timeout detection ( switch all outputs off if software hangs ), IRQ on change of input signal
32 LED for optical function control ( display the state of all inputs and outputs )
Easy connection of external circuits by PAR-KL-68 - Terminal block
CD contains drivers for Windows XP / 2000 / NT 4.x / ME / 98 / 95
Examples for Visual-Studio .NET, Visual Basic, Visual C/C++, Borland, Agilent Vee, Labview, Sun Java and others
5 year warranty

Prijs: 303,45 Euro

The PCIOPTO16IO opto board has 16 inputs and 16 outputs and is designed for industrial purposes.

Optocouplers protecting the inputs and outputs up to 500 Volts
All inputs and outputs are protected by optocouplers. This ensures protection for your personal computer in heavy electrically polluted environment. These optocouplers are designed as AC-optocouplers which means that the polarity of the input signal makes no difference. Also all the inputs have no common ground, so that each of the inputs signals may have a different ground-signal. If you want to have an input range from 5V to 12V you may tell us with your order. The default input range is 12V to 30V.

Input edge detection
The 16 inputs are equiped with input flipflops which detect quick input state changes or remove switch bounce. This allows the detection of fast input changes. It is also possible to generate an interrupt if an input changes.

Timeout control
The board has a configurable onboard timeout control which detects all writes to the PCIOPTO16IO hardware. If the software hangs and the board isn't controlled by the personal computer the outputs are switched off. Think about a heating which overheats or even burns because the PC is "to busy" to switch the heating off. You may setup the timeout-time from 1ms to 16 hours in different steps. This feature can be switched off by a software command.

Software library

VB PCIOPTO16IO example
The PCIOPTO16IO example shows the programming with Visual Basic
You need no knowledge in the driver development. We implemented an command set which is the same for all operating systems. An application that controls the PCIOPTO16IO, and which is generated for Windows 98 can be used directly on a Windows XP PC.

With the QLIB it is easy to create applications with Visual-Studio .NET, Visual-Basic, Borland Delphi or other modern compilers. Even an interface to MS Excel, MS Access or Sun Java is available. We included the VB PCIOPTO16IO Sample which shows how to program and test the card and it also includes the source code. This is a good starting point for your own applications.

The QLIB is a API which provides it's functions through a Windows DLL, so it is possible to use QLIB with all applications that allow access to external DLL Functions.

The PCIOPTO16IO is also available as USB module USBOPTO16IO .

Technische specificaties
•algemeen	Supply voltages: GND / +5 V from 68pin. HD-D-Sub-socket

•Inputs	Input: 16 channel opto-isolated (12V...30V) Optional : 5V...12V Interrupt: with input changes Input Flip-Flops to buffer a change for each channel (16 Flip Flops available)

•Outputs	Output: 16 opto-isolated, no common ground Switching current: max. 100 mA per channel Switching voltage: 0...30 V Timeout time: 1ms...16h in steps to disable outputs while PC is crashed.

•I/O-adres	PCI

•aansluitingsplaat	68pin HD-D-Sub-Connector (female)

•CE	Ja

•interne Tijdsbasis	8 MHz

•onderbrekingen	PCI

•temperatuurbereik	0...70 °C

dokumentatie
	Manual_english_PCIOPTOREL16_PCIOPTO16IO [Download 5,7MB]

Example-projects
	Example for writing to the digital outputs in Borland Builder [Download 449,3KB]

	Example for reading of the digital inputs in Borland Builder [Download 449,4KB]

	Example for writing to the digital outputs in Visual C# .NET [Download 14,3KB]

	Example for writing to the digital outputs in Delphi [Download 6,5KB]

	Example for reading of the digital inputs in Delphi [Download 19KB]

	Example for writing to the digital outputs in Delphi [Download 19KB]

	Example for reading of the digital inputs in Delphi [Download 6,5KB]

	Example for writing to the digital outputs in Java [Download 1,7KB]

	Example for reading of the digital inputs in Java [Download 1,7KB]

	Example for including in Labview [Download 22,3KB]

	Example for writing to the digital outputs in LabWindows / CVI [Download 21,5KB]

	Example for reading of the digital inputs in LabWindows / CVI [Download 21,1KB]

	Example for writing and reading of the hardware-register in Visual-Basic [Download 14,1KB]

	Example for reading of the digital inputs in Visual Basic [Download 9KB]

	Example for writing to the digital outputs in Visual-Basic [Download 9KB]

	Example for Visual-Basic [Download 16,8KB]

	Example for writing to the digital outputs in Visual-Basic.net [Download 16,3KB]

	Example for reading of the digital inputs in Visual Basic.net [Download 16,8KB]

	Example for reading of the digital inputs in C/C++ [Download 30,7KB]

	Example for programming in the memory-mode in C/C++ [Download 17,5KB]

	Example for writing to the digital outputs in C/C++ [Download 26,5KB]

	Example for C/C++ [Download 40,5KB]

	Example for reading of the digital inputs in Visual C++ .NET [Download 0,2KB]

	Example for writing to the digital outputs in Visual C++ .NET [Download 0,2KB]

verkrijgbaar materiaal
•KAB-DSUB-68	Gekonfektioneerde HD-D-SUB kabel 68pol.

•PAR-KL-68	Kabelklemmen voor D-Sub op schroefklemmen, 68pol. D-Sub

•SEN-DREH1	Revolution sensor

•SEN-OBJ1	Object sensor

... back to home

upgedate op 23.1.2009 door Michael Reimer